Model | T4M Series Photoelectric Sensor |
Long-distance Photoelectric Sensor That Supports AC/DC Power Supplies.
Features:
Improved Visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a distance.
Improved operability.(Enlarged sensitivity adjuster and operation selector).
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
Technical Specifications:TypeT4M-T5X1T4M-T5X2T4M-D30X1T4M-D30X2Sensing distance5m300mmSensing objectOpaque materals:f14.8mm min.100x100mm White paperVoltage12~240V DC pulse(P-P)±10% max. 24~240V AC±10% 50/60HzLeakage currentDC/AC 3W max.DC/AC 2W max.Operation modeLight-ONLight-ONDark-ONControl outputAC250V(3A max.) DC5V(10mA min.)Differential travel-20% max. of sensing distanceResponse time30ms max.Directional angleBoth Emitter and Receiver:3~20°-Life expectancy (relay output)Mechanical:50,000,000 times min.(switching frequency:18,000 times/h) Electrical:100,000 times min.(switching frequency: 1,800 times/h)Light source(wavelength)Infrared LED(950nm)Ambient illuminationReceiver side Incandescent lamp:3,000lx max.Ambient temperatureOperating:-25~+70, Storage:-40~+85 (with no icing or condensation)Ambient humidityOperating:45~85%RH, Storage:35~95%RH (with no condensation)Insulation resistance20MO min.(DC500V)Dielectric strengthAC1,500V 50/60Hz 1minVibration resistance10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directionsShock resistanceDestruction500m/s2 3 times each X,Y and Z directionsMalfunction100m/s2 3 times each X,Y and Z directionsDegree of protectionIEC-IP64MaterialCaseABSSensing surfaceMethacrylic resinWeightApprox:420gApprox:250gAccessoriesMounting Bracket, screws, Nuts
Technical Specifications
Type | T3V-V18M10NA | T3V-V18M40NA | T3V-V18M80NA | |
T3V-V18M10PA | T3V-V18M40PA | T3V-V18M80PA | ||
Sensing distance | 100mm | 400mm | 800mm | |
Light source | Infrared LED | |||
Voltage | 10~30V DC pulse(P-P)±10% max. | |||
Current consumption | 30mA max. | |||
Response time | 2ms max. | |||
Control output | Load power supply voltage:30V DC max.; | |||
Load current:100mA max. (Load current with a residual voltage:1.5V max.) Light-ON/Dark-ON mode selector | ||||
Protection circuits | Power supply reverse polarity, Output short-circuit protection | |||
Ambient illumination | Sunlight:10,000lx;Incandescent lamp:3,000lx | |||
Ambient temperature | Operating:-25~+55?, Storage:-40~+70? (with no icing or condensation) | |||
Ambient humidity | Operating:35~85%RH, Storage:35~95%RH (with no condensation) | |||
Insulation resistance | 20MO min.(DC500V) | |||
Dielectric strength | AC1,000V 50/60Hz 1min | |||
Vibration resistance | Destruction | 10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directions | ||
Shock resistance | Destruction | 500m/s2 10 times each X,Y and Z directions | ||
Degree of protection | IEC-IP67 | |||
Material | Case | Nickel-plated brass | ||
Lens | PMMA |
Material | PVC |
Model | T4Z Series Photoelectric Sensor |
Features:
Mechanical axis and optical axis offset of less than ±2.5°simplifies optical axis adjustment.
High stability with unique algorithm that prevents interference of external light.
Low-temperature Operation for Applications in Cold-storage Warehouses.
Technical Specifications:TypeT4Z-T10NT4Z-R2NT4Z-D10NT4Z-D60NSensing distance8m2m180~250mm(100x100mm)450mm(300x300mm)Standard sensing objectOpaque materals:12mm min.Opaque materals:75mm min.-Differential travel-20% max. of sensing distanceDirectional angle3~15°2~10°-Voltage12~24V DC pulse(P-P)±10% max.Current consumptionEmitter:15mA Receiver:20mA30mA max.Protection circuitsReversed power supply polarity protection, Output short-circuit protectionReversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protectionResponse time1.0ms max.2.0ms max.1.0ms max.Control outputLoad power supply voltage:26.4V DC max.
Load current:100mA max. (Load current with a residual voltage:1V max.)Light source(wavelength)Infrared LEDAmbient illuminationSunlight:10,000lx max.;Incandescent lamp:3,000lx max.Ambient temperatureOperating:-25~+55, Storage:-40~+70? (with no icing or condensation)Ambient humidityOperating:35~85%RH, Storage:35~95%RH (with no condensation)Insulation resistance20MO min.(DC500V)Dielectric strengthAC1,000V 50/60Hz 1minVibration resistance10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directionsShock resistanceDestruction500m/s2 3 times each X,Y and Z directionsDegree of protectionIEC-IP67MaterialCasePBTSensing surfaceModified polyarylateWeightApprox:120gApprox:65gAccessories-Reflector-
*Your information is safe with us.
Usage | Detection purpose, unoversal voltage, potential free output. |
Model | T7M Series Photoelectric Sensor |
Features:
Easy installation with LED indicators on product.
Enables to set the operation mode by VR(Light ON/Dark ON)
Status and output LED indication.
Built-in IC photo diode for ambient light and electrical noise.
Technical Specifications:TypeT7M-T10X3T7M-R5X3T7M-D30X3T7M-D50X3Sensing distance5m300mm500mmSensing objectOpaque materals:f14.8mm min.100x100mm White paperVoltage12~240V DC pulse(P-P)±10% max. 24~240V AC±10% 50/60HzLeakage currentDC/AC 3W max.DC/AC 2W max.Operation modeLight-ON; Dark-ON (selectable)Control outputRelay contact output DC30V (resitive load:3A);AC250V(resitive load:3A) Relay contact composition:1CDifferential travel-20% max. of sensing distanceResponse time20ms max.Directional angleBoth Emitter and Receiver:3~20°1~5° C
-Life expectancy (relay output)Mechanical:50,000,000 times min. (switching frequency:18,000 times/h) Electrical:100,000 times min.(switching frequency: 1,800 times/h)Light source(wavelength)Infrared LED(950nm)Ambient illuminationReceiver side Incandescent lamp:3,000lx max.Ambient temperatureOperating:-25~+70, Storage:-40~+85 (with no icing or condensation)Ambient humidityOperating:45~85%RH, Storage:35~95%RH (with no condensation)Insulation resistance20MO min.(DC500V)Dielectric strengthAC1,500V 50/60Hz 1minVibration resistance10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directionsShock resistanceDestruction500m/s2 3 times each X,Y and Z directionsMalfunction100m/s2 3 times each X,Y and Z directionsDegree of protectionIEC-IP64MaterialCaseABSSensing surfaceMethacrylic resinWeightApprox:354gApprox:208gApprox:195gAccessoriesMounting Bracket, screws, Nuts
Model | T3F Series Photoelectric Sensor |
Type | T3F-T5NA | T3F-R2NA | T3F-R3NA | T3F-D10NA | T3F-D30NA | |
Sensing distance | 5m | 2m | 2.5m | 100mm | 300mm | |
Sensing object | Opaque materals:11mm min. | Opaque materals:56mm min. | - | White paper:100x100mm | ||
Voltage | 12~24V DC pulse(P-P)±10% max. | |||||
Leakage current | 45mA max. | 25mA max. | - | |||
Differential travel | - | 20% max. of sensing distance | ||||
Response time | 1.0ms max. | |||||
Sensitivity adjustment | - | Yes | ||||
Control output | Load power supply voltage:26.4V DC max. | |||||
Load current:100mA max.(Load current with a residual voltage:1V max.) | ||||||
Light source(wavelength) | Infrared LED | |||||
Ambient illumination | Receiver side Incandescent lamp:3,000lx max. | |||||
Ambient temperature | Operating:-25~+55 , Storage:-30~+70 (with no icing or condensation) | |||||
Ambient humidity | Operating:45~85%RH, Storage:35~95%RH(with no condensation) | |||||
Insulation resistance | 20MO min.(DC500V) | |||||
Dielectric strength | AC1,000V 50/60Hz 1min | |||||
Vibration resistance | 10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directions | |||||
Shock resistance | Destruction | 500m/s2 3 times each X,Y and Z directions | ||||
Degree of protection | IEC60529 IP66 | |||||
Material | Case | ABS | ||||
Sensing surface | Methacrylic resin | |||||
Weight | Approx:170g | Approx:85g | ||||
Accessories | Nuts | Nuts, Reflector |