Orbital System (Bombay)Private Limited
Bhiwandi, Nashik, Maharashtra
GST No. 27AAACO1534C1ZZ
08046070984 37% Response Rate
Send E-mail
- Home
- »
- Our Product Range
- »
- Area Sensors
| Part Number | T6N |
| Brand | ORBITAL |
Features:
Both the receiver and the emitter feature job indicators,102 mm, with red bright LED.
Interference prevention for parallel installation.
Selectable lighting pattern.
Specifications:
Number of Optical axis8 Optical axis12 Optical axis16 Optical axisTypeT6N-XN8T6N-XN12T6N-XN16T6N-XP8T6N-XP12T6N-XP16Sensing height140mm220mm300mmSensing objectOpaque object:f30mm min.--Sensing range4m--Beam pitch20mm--Voltage12~24V DC pulse(P-P)±10% max.Current consumption Emitter Job indicator ON0.7W max.0.8W max.0.9W max.Current consumption Emitter Job indicator OFF0.6W max.0.7W max.0.8W max.Current consumption Receiver Job indicator ON0.7W max.0.8W max.0.9W max.Current consumption Receiver Job indicator OFF0.6W max.0.7W max.0.8W max.Output operationON when all Optical axis are received(OFF when one or more Optical axis are interrupted)Short-circuit protectionIncorporatedResponse time10ms max.(when the interference prevention is used:12ms max.)
Note:
This device is an Area Sensor / Bin Sensor and must not be used as a Safety Sensor/ Device for human safety for protection of hand or part of body. It does not incorporate a self checking circuit for safety functions necessary to be allow its use as a safety device. A system failure may result in an energised or de energised contact element.
| Type | Sensors |
| Model | T5N Series Area Sensors / Bin Sensors |
| Ultra-Slim Body | Only 10 mm thickness |
Features:
Bright, easy-to-see operating indicator with 8 LED.
Two units can now be operated ina side-by-side configuration without interference, for problem-free detection over wider areas.
Its long sensing range of 3m is sufficient for confirming access to a parts shelf.
Sensor units can be set to detect the interruption of 1 or more beam channels, or can be set to detect only the interruption of 2 or more beam channels.
Technical Specifications:TypeT5N-XN5T5N-XP5Sensing height100mmSensing objectOpaque object:f35mm min.Sensing range0.2~3m(When setting “SHORT”:0.05~1m)Beam pitch25mmVoltage12~24V DC pulse(P-P)±10% max.Current consumptionEmitter:0.5W max.Emitter:0.6W max.Receiver:0.8W max.Receiver:0.9W max.Output(NPN)(PNP)NPN Open-colletector transistorPNP Open-colletector transistor- Maximun sink current:100mA- Maximun sink current:100mA- Applied voltage:30V DC max.
(between output and 0V)- Applied voltage:30V DC max.
(between output and +V)- Residual voltage:
1V max.(sink current:100mA)
0.4V max.(sink current:16mA)- Residual voltage:
1V max.(sink current:100mA) 0.4V max.(sink current:16mA)Output operationON or OFF when one or more beam channels are interrupted/ ON or OFF when two or more beam channels are interrupted
(selectable by operation mode switch)Short-circuit protectionIncorporatedResponse time10ms max.(when the interference prevention is used,in Light state:30ms max.,in Dark state:13ms max.)Interence prevention functionIncorporatedAmbient temperatureOperating: -10~+55, Storage: -20~+70?(with no icing or condensation)Ambient humidityOperating: 35~85%RH, Storage: 35~85%RH(with no condensation)Emitting elementInfrared LED (synchronized scanning system)Degree of prcaotectionIEC-IP62MaterialEnclosure:Heat-resistant ABS,Lens cover: Acrylic,Indicator cover:AcrylicWeightApprox:Emitter: 70g Receiver: 80g
Note:
This device is an Area Sensor / Bin Sensor and must not be used as a Safety Sensor/ Device for human safety for protection of hand or part of body. It does not incorporate a self checking circuit for safety functions necessary to be allow its use as a safety device. A system failure may result in an energised or de energised contact element.